Return to the home page
 
 
 
 
 
 
 
International® Commercial Pumper
For information and pricing regarding the Contender International commercial pumper, please choose the model and the options you would like. The Pierce representative in your area will contact you soon regarding this apparatus.
Click to enlarge
Click image to enlarge

Standard Features
    CLICK HERE to see a list of standard body and chassis features.

To view option photos, roll the cursor over the underlined options.

Models
  Select the preferred model:
7041– International 4400, 2-door, 300hp, side control with A/C
7042– International 4400, 2-door, 300hp, top mount with A/C
7043– International 4400, 4-door, 300hp, side control with A/C & exhaust brake
7044– International 4400, 4-door, 300hp, top mount with A/C & exhaust brake

Available Chassis Options
Step Options
Standard step package with 4-way trim 2-door chassis
Deluxe aluminum step package with 4-way trim & fuel tank cover 2-door chassis
Standard step package with 4-way trim 4-door chassis
Deluxe aluminum step package with 4-way trim & fuel tank cover 4-door chassis
Horn Options
Air horn, (1) Grover behind bumper, instead of std. IHC air horn
Air horns, (2) Grover behind bumper
Air horns, (2) Grover in bumper outside frame, bumper extension
Lanyard control of air horns
Wheel / Wheel Area Options
Wheel liners, S/S, 8.25/9.00" disc, rear, pair
Wheel cover, S/S, 8.25" (front pair)
Mud flaps front and rear
Bumper Options
Chrome front bumper
Bumper extension – 16"
Bumper extension – 22"
Hose tray in center of front bumper extension
Sight rods each side of front bumper
Additional Chassis Options
SCBA seats
Ziamatic brackets in SCBA seats
Alternating headlight flasher

Available Body, Tank and Pump Options
Body & Storage Options
Air bottle compartments four (4) at fender panels
Additional hosebed divider (unpainted)
Compartment shelf; quantity
Shelf tracks; quantity
500 lb. slide out tray floor mounted without sides (use with generator)
500 lb. slide out tray floor mounted with 2" sides
Aluminum 4-way under tray
Double pan lap doors
Doors, roll-up, Gortite, painted
Rear, stainless steel fender crowns

Stainless steel scuffplate lower portion compartment door

Step, full width, rear of body, 10"
Partitions for rear compartments
Microphone & speaker compartment w/plain door at top mount panel
Electrical
Charger, single system, Kussmaul 1000, w/Battery Saver
Charger, single system, Kussmaul Pump Plus 1200
Shoreline, Kussmaul Auto Eject, 15 amp
Wiring for automatic tire chains
Foam Systems
Foam system, 1400 GPM around the pump (single agent) includes foam gauge
Foam system, Akron Eductor 3096-95 (single agent) includes foam gauge
Foam system, FoamPro1600 (single agent) – plumbed to #1 crosslay and choice
Foam cell, 30 gallon
Foam cell, 20 gallon
Gauge, foam level
Additional water level gauge at rear of truck
Husky ® 12 foam system
Hercules® compressed air foam system (CAFS)
Generator
Honda EM5000 watt generator & circuit breaker panel (tray not included)
Honda EM3500 watt generator & circuit breaker panel (tray not included)
Electric start provisions for generator
Mounting for DTF generator (tray not included)
Circuit breaker panel for DTF generator
Hose & Hose Storage
Running board hose tray, 100' of 1.5" hose capacity
Cover, crosslay, alum treadplate, single hinged
Hard suction hose – two 10' lengths of 6" PVC clear
Hard suction hose troughs – aluminum (one each side)
Hard suction hose troughs, low side – aluminum (stacked)
Hard suction hose troughs – aluminum, double, DS
Hard suction hose troughs – aluminum, single
Reel, Booster – rear compartment, (includes 150' of hose and rewind switch)
Reel, Booster – over pump, pass. side (includes 150' of hose and rewind switch)
Reel, Booster – over pump, driver side (includes 150' of hose and rewind switch)
Nozzle, Elkhart S-200, 1.00"
Hose, booster – 200' of 1.00"/800 PSI – in place of std 150' on reel
Aluminum 4-way under booster reel rear compartment
Roller and spool assembly, two at rear
Roller assembly, additional
Red hose bed cover w/snap fasteners
Red hose bed cover w/shock cord & Velcro @ front
Plumbing, Inlets & Discharges
Outlet, 4" w/4" right (Waterous Pump) (elbow required – see below)
Elbow, 30-degree – 4.00"(F) x 4.00" Storz
Additional 2.50" inlet for right-hand pump panel
Additional 2.50" discharge outlet right hand pump panel
Additional 2.50" rear discharge outlet, PS, (includes chrome elbow)
Direct 2.50" rear tank fill (passenger side) includes 30-degree chrome elbow
Rear 10" Newton dump valve with stationary chute
Slide out chute for 10" Newton dump valve
1.50" outlet w/2" plumbing swivel recessed in center hose tray
1.50" outlet w/2" plumbing, top of bumper extension
1/2" recirculating line
6" butterfly dump valve w/Ames coupling
Hand Tool Storage
Tool compartments in walkway – top mount
Aluminum pike pole tube
Tulip clip holders for pike poles
Pumps & Tanks
750 gallon tank in place of 1000 gallon
Hot water heater for heat enclosure
Under pump heat enclosure
RPM test port
Mechanical seals on pump
Lighting
Load Manager, Kussmaul Load Manager 2, (2) Channel
Extenda-Lite, E-1500 w/telescoping lift up pole (pair)
Extenda-Lite, E-500 w/telescoping lift up pole, (1), top mount pump control
Receptacle – 15-amp, 120V, twist lock
Receptacle – 20-amp, 120V, twist lock
Extenda-Lite, E-500 w/telescoping lift up pole,(1) side control pump panel
Extenda-Lite Day-Maker w/telescoping pole (pair) (load manager required)
Federal Night-Fighter w/telescoping pole (pair) (load manager required)
Light, Side Zone Lower, Code-3 40BZ strobe, 2 pair
Lights, Rear Zone Lower, Code 3 80 Strobe
Rear Warn Lights Low Mount, Stainless brackets
Graphics & Paint
Optional paint color (other then red #90)
Jog, "Z"-shaped, in reflective stripe
Lettering – Appleton Goldstar Goldleaf (41 – 60 letters)
Reflective band 1"-6"-1"
   
Name:*
Department:
Address:*
City:*
ST: *  ZIP/Postal:*
E-mail:*
Phone:*
  * Name, address and e-mail are required to get you the information you request.
You will receive a copy of this request via e-mail for your own records.