Contender by Pierce - Custom Chassis Spec Online

Contender® Custom Pumper

For information and pricing regarding the Contender custom pumper, please choose the model and the options you would like. The Pierce representative in your area will contact you soon regarding this apparatus.

Click image to enlarge

Standard Features
CLICK HERE to see a list of standard body and chassis features.

To view option photos, roll the cursor over the underlined options.

Models
	Select the preferred custom model:
	7049 Side Control, 4-door, A/C, Allison 3000 EVS P Automatic
	7050 Top Control, 4-door, A/C, Allison 3000 EVS P Automatic
	7051 Top Control with Speed-lays, 4-door, A/C, Allison 3000 EVS P Automatic
Available Chassis Options
Engine Options
	315hp Cummins engine (standard)
	330hp engine
	350hp engine
	400hp engine
Horn Options
	Air horns, (2) Grover in bumper outside frame, bumper extension
Wheel / Wheel Area Options
	Wheel liners, S/S, 8.25/9.00" disc, rear, pair
	Wheel cover, S/S, 8.25" (front pair)
	Mud flaps front and rear
Bumper Options
	Bumper extension – 16"
	Bumper extension – 19"
	Bumper extension – 22"
	Hose tray in center of front bumper extension
	Sight rods each side of front bumper
Additional Chassis Options
	Padded engine tunnel cover
	Intermittent windshield wipers
	Alternating headlight flasher
Available Body, Tank and Pump Options
Body & Storage Options
	Air bottle compartments four (4) at fender panels
	Additional hosebed divider (unpainted)
	Compartment shelf; quantity
	Shelf tracks; quantity
	500 lb. slide out tray floor mounted without sides (use with generator)
	500 lb. slide out tray floor mounted with 2" sides
	Aluminum 4-way under tray
	Double pan lap doors
	Doors, roll-up, Gortite, painted
	Rear, stainless steel fender crowns
	Stainless steel scuffplate lower portion compartment door
	Step, full width, rear of body, 10"
	Partitions for rear compartments
	Microphone & speaker compartment w/plain door at top mount panel
Electrical
	Charger, single system, Kussmaul 1000, w/Battery Saver
	Charger, single system, Kussmaul Pump Plus 1200
	Shoreline, Kussmaul Auto Eject, 15 amp
	Wiring for automatic tire chains
Foam Systems
	Foam system, 1400 GPM around the pump (single agent) includes foam gauge
	Foam system, Akron Eductor 3096-95 (single agent) includes foam gauge
	Foam system, FoamPro1600 (single agent) – plumbed to #1 crosslay and choice
	Foam cell, 30 gallon
	Foam cell, 20 gallon
	Gauge, foam level
	Additional water level gauge at rear of truck
	Husky ® 12 foam system
	Hercules® compressed air foam system (CAFS)
Generator
	Honda EM5000 watt generator & circuit breaker panel (tray not included)
	Honda EM3500 watt generator & circuit breaker panel (tray not included)
	Electric start provisions for generator
	Mounting for DTF generator (tray not included)
	Circuit breaker panel for DTF generator
Hose & Hose Storage
	Running board hose tray, 100' of 1.5" hose capacity
	Cover, crosslay, alum treadplate, single hinged
	Hard suction hose – two 10' lengths of 6" PVC clear
	Hard suction hose troughs – aluminum (one each side)
	Hard suction hose troughs, low side – aluminum (stacked)
	Hard suction hose troughs – aluminum, double, DS
	Hard suction hose troughs – aluminum, single
	Reel, Booster – rear compartment, (includes 150' of hose and rewind switch)
	Reel, Booster – over pump, pass. side (includes 150' of hose and rewind switch)
	Reel, Booster – over pump, driver side (includes 150' of hose and rewind switch)
	Nozzle, Elkhart S-200, 1.00"
	Hose, booster – 200' of 1.00"/800 PSI – in place of std 150' on reel
	Aluminum 4-way under booster reel rear compartment
	Roller and spool assembly, two at rear
	Roller assembly, additional
	Red hose bed cover w/snap fasteners
	Red hose bed cover w/shock cord & Velcro @ front
Plumbing, Inlets & Discharges
	Outlet, 4" w/4" right (Waterous Pump) (elbow required – see below)
	Elbow, 30-degree – 4.00"(F) x 4.00" Storz
	Additional 2.50" inlet for right-hand pump panel
	Additional 2.50" discharge outlet right hand pump panel
	Additional 2.50" rear discharge outlet, PS, (includes chrome elbow)
	Direct 2.50" rear tank fill (passenger side) includes 30-degree chrome elbow
	Rear 10" Newton dump valve with stationary chute
	Slide out chute for 10" Newton dump valve
	1.50" outlet w/2" plumbing swivel recessed in center hose tray
	1.50" outlet w/2" plumbing, top of bumper extension
	1/2" recirculating line
	6" butterfly dump valve w/Ames coupling
Hand Tool Storage
	Tool compartments in walkway – top mount
	Aluminum pike pole tube
	Tulip clip holders for pike poles
Pumps & Tanks
	750 gallon tank in place of 1000 gallon
	Hot water heater for heat enclosure
	Under pump heat enclosure
	RPM test port
	Mechanical seals on pump
Lighting
	Load Manager, Kussmaul Load Manager 2, (2) Channel
	Extenda-Lite, E-1500 w/telescoping lift up pole (pair)
	Extenda-Lite, E-500 w/telescoping lift up pole, (1), top mount pump control
	Receptacle – 15-amp, 120V, twist lock
	Receptacle – 20-amp, 120V, twist lock
	Extenda-Lite, E-500 w/telescoping lift up pole,(1) side control pump panel
	Extenda-Lite Day-Maker w/telescoping pole (pair) (load manager required)
	Federal Night-Fighter w/telescoping pole (pair) (load manager required)
	Light, Side Zone Lower, Code-3 40BZ strobe, 2 pair
	Lights, Rear Zone Lower, Code 3 80 Strobe
	Rear Warn Lights Low Mount, Stainless brackets
Graphics & Paint
	Optional paint color (other then red #90)
	Jog, "Z"-shaped, in reflective stripe
	Lettering – Appleton Goldstar Goldleaf (41 – 60 letters)
	Reflective band 1"-6"-1"

Name:*
Department:
Address:*
City:*	ST: * ZIP/Postal:*
E-mail:*
Phone:*
	* Name, address and e-mail are required to get you the information you request. You will receive a copy of this request via e-mail for your own records.